SwissChuck AG
EN
TGC / FTGC

TGC / FTGC

Tool chucks TGC for the automated production

"Are you still setting up or already grinding?"

Increase your productivity and lower your cost!
In modern manufacturing, batch sizes are becoming smaller and smaller, and machining processes are more complex. At the same time, however, the demand for fully automated production is increasing, which makes it possible to reduce personnel costs and increase productivity. To exploit the full potential of modern production machines, a flexible clamping device with variable clamping diameter is a prerequisite

Specification data sheet for your enquiry

Downloads

TGC Mehrbereichspannfutter Deutsch TGC Multi-Range Chuck English
TGC / FTGC
Technical data

TGC Werkzeugspannfutter


Typ TGCMicro | Cylinder actuated

Outer Diameter74 mm
Clamping Range3-12 mm
Stroke per Jaw4.5 mm
Max Actuating Force3.65 kN
Max Clamping Force3.65 kN
Max Speed4000 1/min.
Piston Stroke (Actuating Cylinder)10 mm

 

 

 

 

 

 

 

 

 

 

Typ TGCMacro | Cylinder actuated

Outer Diameter135 mm
Clamping Range5-20 mm
Stroke per Jaw7.5 mm
Max Actuating Force10 kN
Max Clamping Force10 kN
Max Speed2500 1/min.
Piston Stroke (Actuating Cylinder)13.5 mm

 

PDF Product catalogue

Functions & Fields of Application

  • Variable clamping range
  • Interface to axial stops
  • Patented clamping technology
  • Various actuation options
  • For tool-grinding machines
  • For grinding machines
  • For lathes
  • Cylindrical grinding
  • Soft and hard turning
     

Advantages

  • Variable clamping range reduces setup times
  • No manual change-over of the collets is necessary
  • Suitable for automated production
  • Highest precision ≤ 0.005mm
  • Active air purge protects from contamination
  • Axially stationary tungsten carbide jaws guarantee minimal wear of clamping position
  • Suitable for tool grinding machines, cylindrical grinding machines, and lathes
  • No separate alignment and truing for individual clamping areas are necessary
  • Existing interfaces for Rollomatic, Studer, Junker, Schütte, and Benzinger
  • On customer request, chucks can be adapted to all common machine spindles
     
Increase your productivity and reduce costs!

Increase your productivity and reduce costs!

In high-volume production, different production batch sizes, including different clamping diameters, should be ground without manual change-over of the collets. With the TGC multi-range chuck, we have met all these requirements. Whether for production or resharpening solid body tools (milling cutters, drills, taps, or reamers), we guarantee the highest concentricity over the entire clamping range with the premium TGC chuck. In addition, we can flexibly adapt the clamping device to the machine-specific interfaces and adjust the variable clamping range to the customer's specifications. In short - we create the optimum version for you so that you can truly increase your productivity while, at the same time, reducing costs.

 

Patented multi-range chuck TGC of the highest precision – are you still setting up or already grinding?

With the patented TGC® tool chuck, you can reduce your setup times to a minimum. There is no need to change collets for each clamping diameter and adjust individual clamping ranges. This design feature allows you to automate your production and benefit from maximum precision over the entire clamping range. The field of application ranges from tool grinding machines and cylindrical grinding machines to lathes, from cylindrical grinding to turning to hard-turning operations. SwissChuck supplies complete solutions - machine-side interfaces are available. We already have interfaces for Rollomatic, Studer, Junker, Schütte, and Benzinger. On customer request, interfaces for other common machine spindles can be supplied.

Anwendungsbeispiele

TGC Micro 3-12 mm

OD clamping of an end mill:

  • Grinding of end mills of varying diameters from 3 to 12 mm
  • Axially stationary clamping jaws over the whole clamping range
  • No manual change-over of clamping jaws is necessary
[Translate to English:] TGC Micro 3-12mm

TGC Special Clamping Areas 2 - 52 mm

Hydraulically actuated special chuck:
For the grinding of solid tungsten carbide drills

  • Multiple change-over of chuck per day. Hence, this requires a special precision zero-point interface
  • Chuck change-over in less than five minutes
  • No clocking of the chuck required
  • Three chucks cover the complete clamping range of ø2 to  ø52 mm
[Translate to English:] Mehrbereichspannmittel Sonderbereich
Back